Practical decision guide
How to Measure an AI Pilot’s Value
Use a practical AI pilot worksheet to compare time saved, review effort, running costs and setup cost before expanding a workflow.
By StartMadeSimple · Published 16 November 2026
The short answer
Measure the whole workflow before and after the pilot. Count human review, corrections, software costs and maintenance, then compare the result against the setup cost. A faster first draft is useful only if the complete job meets the required quality.
The decision at a glance
| Measure | Before the pilot | After the pilot |
|---|---|---|
| Complete handling time | Preparation to finished handover | Preparation, generation, review and correction |
| Quality | Required facts and acceptable errors | The same criteria on comparable examples |
| Monthly cost | Existing tools and operating time | Tools, maintenance and remaining operating time |
| Ownership | Current process owner | Named owner, escalation and recovery route |
Start with one job and a baseline
Choose a repeated task with a clear start and finish. Record the number of runs in a typical month, the time each run takes and the quality threshold. Use representative work rather than only the easiest examples. If workload varies, keep separate estimates for quiet and busy periods.
Measure review and exceptions
Record all time spent preparing inputs, reviewing outputs, correcting mistakes and handing the work to the next person. Include cases where the automation cannot complete the task. A useful result identifies an exception clearly rather than silently passing incomplete work onward.
Calculate the result
Estimated monthly capacity value equals monthly runs multiplied by minutes saved per run, divided by 60 and multiplied by the hourly value of that time. Subtract monthly software and maintenance costs. Divide setup cost by a positive monthly net value for an indicative payback period. Released time becomes a cash saving only if it reduces a real cost; otherwise it is capacity for other work.
An illustrative calculation
For 120 runs a month, reducing the complete job from 20 to 8 minutes releases 24 hours. At an assumed £25 per hour, that represents £600 of capacity. After £150 of monthly running costs, the estimated net value is £450. A £2,950 setup would have an indicative payback of about 6.6 months. These are fictional planning inputs, not StartMadeSimple customer results or a promise of savings.
Decide what happens next
Expand only when the quality, operating ownership and economics all support the decision. Rework may be appropriate if the result is useful but exceptions are expensive. Stop if a simpler process change delivers the same benefit with less cost or risk. Keep the baseline and test record so the next review can use evidence.
Try your own AI pilot assumptions
Example values are prefilled. Replace them with your estimates. Values stay in this page; this calculator does not send them to us.
Net monthly value after running costs: £450.00.
Indicative setup payback: 6.6 months.
Planning estimate, not a financial forecast or measured customer result. Released time is not automatically a cash saving. Quality, data permissions and operating reliability need a separate assessment.
How to use this guide
Treat the calculator as a planning aid. Validate the inputs with your own records and assess quality separately from time saved.
This is a StartMadeSimple planning framework based on the scope of our advisory and software services. It is not a controlled study or a claim of measured customer results. Verify assumptions against your own records and use the same criteria when comparing alternatives.
Download the business decision checklistWork through your own situation
Bring the current workflow, the decision you need to make and the evidence you already have.
Explore bespoke business systems and AI automation.
Related decision guides
Consultant, Agency or Software?
Compare business consultancy, an agency and software against the decision, delivery work and operating ownership your business needs.
Buy, Integrate or Build Software?
Compare existing software, integrations and a bespoke build using workflow fit, ownership, change costs and an acceptance checklist.